SG-100 Metering data exchange and modeling using DLMS/COSEM
The goal of this training is to provide an understanding of DLMS/COSEM, its architecture, its data exchange protocol and the underlying data modeling.
- DLMS/COSEM standard overview
- Architecture
- Data exchange protocol
- Data modeling
- Practical work
1.5 day
SG-101 Technical overview of G3-PLC and its use
The main goal of this training is to enable a good understanding of the main mechanisms of G3-PLC technology and its integration into a G3-PLC based system. It also covers G3-PLC security and shows some generic principles of PLC technologies.
-
G3-PLC standard overview and PLC theoretical basis
-
G3-PLC layer by layer
-
Physical layer
-
MAC layer
-
Adaptation layer
-
IPv6 and UDP layers
-
G3-PLC security
-
1.5 day
SG-200 Use of G3-PLC Alliance Tester for device testing
The goal of this training is to teach the users of the test tools all the required knowledge in order to understand how the tool works, how to configure it, and how to prepare and run test campaigns.
-
General overview of G3-PLC and certification
-
G3-PLC Alliance Tester
-
Practical work
1 day
EM-100 ISO/IEC 15118 standards and its services
The EM-100 training provides you with an advanced understanding of the communication between EV and EVSE in terms of ISO 15118 / DIN 70121 standards.
Both high level communication (ISO 15118–2 & ISO 15118–20) and Low level communication (ISO 15118–3 & IEC 61851–1) will be considered. This will give you all the keys to develop, debug, validate or use your CCS setup.
This training duration is 1.5 days. Each training session is organized on demand and can be done online or on-site.
One training session may accept up to 10 attendees.
Download the training sheet – ISO 15118 Training
EM-201 OCPP specification and its use cases
Our EM-201 training provides an advanced understanding of the communication between Charging Stations (CS) and Charging Station Management Systems (CSMS) in terms of the Open Charge Point Protocol (OCPP) 1.6 & 2.0.1 specifications. The presentation of both specifications is based on the OCPP functional blocks.
This will give you all the keys to develop debug, validate or use your OCPP setup.
The training duration is 1.5 days. Each training session is organized on demand and can be done online or on-site.
One training session may accept up to 10 attendees.
Download the training sheet – Training OCPP
PE-100 Introduction to privacy engineering
This course explains the motivation for privacy engineering and how it is implemented in organisations. It will help to understand how privacy-by-design and privacy-by-default can be enforced in order to meet privacy obligations.
The course is based on the work carried out in Europe in the past 4 years to establish a privacy engineering discipline.
Introduction to privacy
Privacy engineering objectives
o Ensuring privacy-by-design and privacy-by-default
o Integrating privacy impact assessment
o Privacy protection goals versus security protection goals
A typical engineering process
o Operationalising privacy principles
o Design strategies for privacy
Multi-disciplinary management
o Interacting with management
o Interacting with the data protection officer
Institutionalising privacy engineering
o Overview of standards and best practice
1 day
PE-101 Privacy engineering practice
This course is about understanding how privacy engineering is practiced. It will explain to engineers the role of privacy management in an organisation and how to integrate privacy concerns in an engineering process.
The course is based on the work carried out in Europe in the past 4 years to establish a privacy engineering discipline.
Introduction to privacy and privacy management
• Privacy engineering going beyond security engineering
o Privacy engineering principles
o Privacy engineering objectives
o Privacy protection goals
• Methodology for privacy engineering. Example of the PRIPARE handbook
o Threat analysis
o Operationalisation of privacy principles
o Design strategies for privacy. Defining a resulting architecture and selecting appropriate privacy controls
o Assurance for privacy
o Breach management
• Integration in system and software engineering practices
• Standards and best practices
o STRIDE/LINDDUN
o PMRM
o Privacy framework (ISO 29000)
o Privacy impact assessment (ISO 29134)
o Code of practice for PII protection (ISO 29151)
o Privacy engineering (ISO project development)
• Challenges lying ahead.
• Discussion with attendees.
3 days
PE-200 Privacy management requirements
This workshop is dedicated to stakeholders involved in the implementation of global ICT ecosystem initiatives such as smart cities, IoT, big data, transport, ageing, or smart grid. It will help them elaborate on requirements for future privacy management that take into account obligations for privacy impact assessment, privacy-by-design and privacy-by-default.
The workshop consists of 4 steps:
• Step 1: half-day briefing on privacy management
• Step 2: half-day discussion on the selected ecosystem initiative (e.g. Smart city)
• Step 3: one day discussion on example use cases
• Step 4: analysis and presentation of a report on privacy management requirements
Step 1, 2 and 3 require 2-day face-to-face meetings. Step 4 can be either a 2-hour face-to-face meeting or a web-conference meeting.
2 days + 2 hours
PE-201 Approach to address privacy management in an ICT application
This workshop enables developers of an ICT application to start practicing privacy management for their application.
· The workshop consists of 4 steps:
• Step 1: Half a day presentation on privacy management
• Step 2: Half a day discussion on application
• Step 3: One day practicing privacy management
• Step 4: Providing a practice report
Step 1, 2 and 3 require 2-day face-to-face meetings. Step 4 can be either a 2-hour face-to-face meeting or a web-conference meeting.
2 days + 2 hours
Training
Trialog helps you to handle the state-of-the art technologies to integrate them into your project.
This training is split into several modules, whose level of detail will depend on your objectives and the background of the attendees.
Our training
Energy
Trialog offers a complete and modular training program on Smart Metering.
Download the datasheet.
In addition, the following trainings are available:
Have a question? Need a quotation?